MEASURING FOR BLINDS

Made to Measure Blinds in Ilminster, Taunton, Yeovil and throughout Somerset

GET A QUICK QUOTATION
© Carols Curtains & Blinds   Hazelwood, The Lane, Horton, Ilminster TA19 9QJ
Interior Design | Made to Measure Curtains | Made to Measure Blinds | Fabrics | Hand Made Curtains | Ilminster | Taunton |  Somerset
Tel: 01460 53968
Measurements must be to the nearest centimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Decide which side you would like the cords, left or right
Fitting inside the recess
The blind will be made 1 cm narrower than measurement supplied to ensure it can be operated successfully
Measurements must be to the nearest centimetre
Measure the window recess and add 5 - 7 cm overlap either side, making sure you have 5 - 7 cm clear either side
Measure the drop of the window recess and add 10 cm above and below, making sure you have 10 cm clear above and below the window recess
Decide which side you would like the cords, left or right
Fitting outside the recess

For Roman Blinds

Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering.
Decide which side you would like the controls, left or right
Fitting inside the recess
Decide how you would like the blind rolled, normal or reverse rolled
Measurements must be to the nearest millimetre
Measure the window recess and add 50 - 70 mm overlap either side, ensuring you have 50 - 70 mm clear either side.
Measure the drop of the window recess and add 100 mm above and below, making sure you have 100 mm clear above and below the window recess
Decide which side you would like the controls, left or right
Fitting outside the recess

For Roller Blinds

Decide how you would like the blind rolled, normal or reverse rolled
Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Fitting inside the recess
Measurements must be to the nearest millimetre
Measure the width of the window recess and add 50 - 70 mm overlap either side, making sure you have 50 - 70 mm clear either side
Measure the drop of the window recess and add 100 mm above and below, making sure you have 100 mm clear above and below your blind
For full length blinds measure from the top of the recess to the floor and add 100 mm above, making sure you have 100 mm clear above the window recess
Fitting outside the recess

For Venetian Blinds

Measurements must be to the nearest millimetre
Measure actual width of glass
Measure actual drop of glass
Measure depth of window beading, ensuring a minimum depth 11 mm
Fitting 'intu' venetian blinds, in the recess of the glass
Screw Fix can be for either PVCu or Timber but Bead Fit is for PVCu only
Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Decide on number of panels required, widths can be from 300 mm to 1100 mm
Fitting inside the recess
Decide how you would like the panels to stack when open,  to the Left, Right or Split Draw
Measurements must be to the nearest millimetre
Measure the window recess and add 200 - 300 mm overlap either side, making sure you have 200 - 300 mm clear either side
Measure the drop from the top of the window recess to the floor and add 100 mm above, making sure you have 100 mm clear above the window recess
Decide on number of panels required, widths can be from 300 mm to 1100 mm
Fitting outside the recess

For Panel Blinds

Decide how you would like the panels to stack when open,  to the Left, Right or Split Draw
Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Decide which side you would like the controls, Left or Right
Fitting inside the recess
Measurements must be to the nearest millimetre
Measure the window recess and add 200 - 300 mm overlap either side, making sure you have 200 - 300 mm clear either side
Measure the drop from the top of the window recess to the floor and add 100 mm above, making sure you have 100 mm clear above the window recess
Decide which side you would like the controls, Left or Right
Fitting outside the recess

For Pleated Blinds

Measurements must be to the nearest millimetre
Measure actual width of glass
Measure actual drop of glass
Measure depth of window beading, minimum depth 11 mm
Fitting 'intu' pleated blinds, in the recess of the glass
Screw Fix can be for either PVCu or Timber but Bead Fit is for PVCu only
Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering.
Fitting inside the recess
Measurements must be to the nearest millimetre
Measure the window recess and add 50- 70 mm overlap either side, making sure you have 50 - 70 mm clear either side
Measure the drop of the window recess and add 100 mm above and below, making sure you have 100 mm clear above and below your blind
For full length blinds measure from the top of the recess and add 100 mm above, making sure you have 100 mm clear above the window recess
Fitting outside the recess

For Vertical Blinds

Fitting outside the recess
CAROLíS Curtains & Blinds
© Carols Curtains & Blinds   Ilminster
Interior Design | Made to Measure Curtains | Made to Measure Blinds Fabrics | Hand Made Curtains | Ilminster | Taunton | Somerset
Measurements must be to the nearest centimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Decide which side you would like the cords, left or right
Fitting inside the recess
The blind will be made 1 cm narrower than measurement supplied to ensure it can be operated successfully

For Roman Blinds

MEASURING FOR BLINDS

Made to Measure Blinds in Ilminster,

Taunton, Yeovil and throughout Somerset

Fitting outside the recess
Measurements must be to the nearest centimetre
Measure the window recess and add 5 - 7 cm overlap either side, making sure you have 5 - 7 cm clear either side
Measure the drop of the window recess and add 10 cm above and below, making sure you have 10 cm clear above and below the window recess
Decide which side you would like the cords, left or right
Fitting inside the recess

For Roller Blinds

Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering.
Decide which side you would like the controls, left or right
Decide how you would like the blind rolled, normal or reverse rolled
Fitting outside the recess
Measurements must be to the nearest millimetre
Measure the window recess and add 50 - 70 mm overlap either side, ensuring you have 50 - 70 mm clear either side.
Measure the drop of the window recess and add 100 mm above and below, making sure you have 100 mm clear above and below the window recess
Decide which side you would like the controls, left or right
Decide how you would like the blind rolled, normal or reverse rolled
Fitting inside the recess

For Venetian Blinds

Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Fitting outside the recess
Measurements must be to the nearest millimetre
Measure the width of the window recess and add 50 - 70 mm overlap either side, making sure you have 50 - 70 mm clear either side
Measure the drop of the window recess and add 100 mm above and below, making sure you have 100 mm clear above and below your blind
For full length blinds measure from the top of the recess to the floor and add 100 mm above, making sure you have 100 mm clear above the window recess
Fitting 'intu' venetian blinds, in the recess of the glass
Measurements must be to the nearest millimetre
Measure actual width of glass
Measure actual drop of glass
Measure depth of window beading, ensuring a minimum depth 11 mm
Screw Fix can be for either PVCu or Timber but Bead Fit is for PVCu only
Fitting inside the recess

For Panel Blinds

Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Decide on number of panels required, widths can be from 300 mm to 1100 mm
Decide how you would like the panels to stack when open,  to the Left, Right or Split Draw
Fitting outside the recess
Measurements must be to the nearest millimetre
Measure the window recess and add 200 - 300 mm overlap either side, making sure you have 200 - 300 mm clear either side
Measure the drop from the top of the window recess to the floor and add 100 mm above, making sure you have 100 mm clear above the window recess
Decide on number of panels required, widths can be from 300 mm to 1100 mm
Decide how you would like the panels to stack when open,  to the Left, Right or Split Draw
Fitting inside the recess

For Pleated Blinds

Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering
Decide which side you would like the controls, Left or Right
Fitting outside the recess
Measurements must be to the nearest millimetre
Measure the window recess and add 200 - 300 mm overlap either side, making sure you have 200 - 300 mm clear either side
Measure the drop from the top of the window recess to the floor and add 100 mm above, making sure you have 100 mm clear above the window recess
Decide which side you would like the controls, Left or Right
Fitting 'intu' pleated blinds, in the recess of the glass
Measurements must be to the nearest millimetre
Measure actual width of glass
Measure actual drop of glass
Measure depth of window beading, minimum depth 11 mm
Screw Fix can be for either PVCu or Timber but Bead Fit is for PVCu only
Fitting inside the recess

For Vertical Blinds

Measurements must be to the nearest millimetre
Measure the recess width in three places, top, middle & bottom and record the narrowest measurement for ordering
Measure the drop in three places, left, middle and right and record the shortest measurement for ordering.
Measurements must be to the nearest millimetre
Measure the window recess and add 50- 70 mm overlap either side, making sure you have 50 - 70 mm clear either side
Fitting outside the recess
Measure the drop of the window recess and add 100 mm above and below, making sure you have 100 mm clear above and below your blind
For full length blinds measure from the top of the recess and add 100 mm above, making sure you have 100 mm clear above the window recess
CAROLíS Curtains & Blinds